Installing Multi-Function Station - Panasonic KX-FLM652CX Service Manual

3.5.

INSTALLING MULTI-FUNCTION STATION

• • • • The screenshots shown in these instructions are for
Windows XP and are included for reference only.
• • • • The screenshots shown in these instructions may differ
slightly from those of the actual product.
• • • • Software features and appearance are subject to
change without notice.
1. Start Windows and exit all other applications.
• • • • For Windows XP and Windows 2000 users, you must be
logged in as an administrator in order to install Multi-
Function Station.
• • • • Install Multi-Function Station before connecting the fax
machine to a computer. If the fax machine is connected
to a computer before installing Multi-Function Station,
the [Found New Hardware Wizard] dialog box will
appear. Click [Cancel] to close it.
2. Insert the included CD-ROM into your CD-ROM drive.
• • • • The [Choose Setup Language] dialog box will appear.
Select the desired language that you want to use with this
software from the drop-down list. Click [OK]. The
installation will automatically start.
• • • • If the [Choose Setup Language] dialog box does not
appear:
The installation will automatically start.
• • • • If the installation does not start automatically:
Click [Start]. Choose [Run...]. Type "D:\setup" (where "D:"
is the drive letter of your CD-ROM drive). Click [OK].
(If you are not sure what the drive letter is for your CD-ROM
drive, use Windows Explorer and look for the CD-ROM
drive.)
The installation will start.
3. When the setup program starts, follow the on-screen
instructions.
4. When the [Setup Type] dialog box appears, select
[Standard], then click [Next].
• • • • Readiris OCR software and Device Monitor will also be
installed.
5. When the [Connect Type] dialog box appears, select
[Connect directly with a USB cable.], then click [Next].
• • • • The [Connect Device] dialog box will appear.
6. Connect the unit with the USB cable, then click [Next].
• • • • If the unit is connected to your computer, the model name
will be automatically detected.
• • • • You can change the names for the printer, PC fax, and
scanner if necessary.
7. Click [Install], then follow the on-screen instructions.
• • • • The files will be copied to your computer.
Important notice for Windows XP users
• • • • If you use Windows XP, the following message may appear
after step 6:
"The software you are installing for this hardware has not
passed Windows Logo testing to verify its compatibility with
Windows XP"
This is normal and the software will not cause any
difficulties with your operating system. You can continue the
installation with no problem.
Note:
• • • • If the screen prompts to insert the CD-ROM for operating
system when installing Multi-Function Station, insert it into
your CD-ROM drive.
29
KX-FLM652CX