Sensors And Switches Section - Panasonic KX-FLM652CX Service Manual

7.11. SENSORS AND SWITCHES SECTION

All of the sensor and switches are shown below.
Sensor Circuit Location
Operation Panel
Operation Panel
High Voltage PCB
Toner Sensor PCB
Digital PCB
Digital PCB
Exit Sensor PCB
Toner Sensor PCB
Analog PCB
Note:
See TEST FUNCTIONS - SENSOR CHECK SECTION for the sensor test.
(#815 of Service Mode test. Refer to TEST FUNCTIONS (P.69).
7.11.1. HOOK SWITCH
When the handset is raised, the switch is turned OFF, and the signal at pin K15 of IC600 is high.
When the handset is returned, the switch is turned ON, and the signal at pin K15 of IC600 is low.
Sensor Sensor or Switch Name
PS101 Document set
SW146 Paper Feed
SW1 Printer Open
SW1 OPC Set
PS601 Register
PS600 Paper
PS1 Exit
SW1,IC1 Dev & Toner Set
SW200 Hook
185
Message Error
[CHECK DOCUMENT]
[REMOVE DOCUMENT]
[COVER OPEN]
[CHECK DRUM]
[FAILED PICKUP]
[OUT OF PAPER]
[PAPER JAMMED]
[TONER EMPTY]
[TONER LOW]
[CHECK DRUM]
————
KX-FLM652CX