JVC HM-HDS1EU Instructions Manual page 86

86
EN
Fine-Tuning Channels Already Stored
Perform steps A and C of "Manual Channel Set" on page 82
to access the Confirmation screen before continuing.
A
Select the channel to fine-tune.
Press until the channel you want to tune begins
rt w e
blinking.
B
Access the Manual Channel Set screen.
Press OK twice. The Manual Channel Set screen appears.
C
Perform tuning.
Press until "+/–" begins blinking, then press
e
the picture is its clearest. Then press OK.
The Confirmation screen appears.
Repeat steps A – C as necessary.
D
Close the Confirmation screen.
Press MENU.
When Receiving A Scrambled
Broadcast
A
Select the decoder mode.
Set "L-2 SELECT" to "DECODER" (
B
Access the Confirmation screen.
Perform steps
page 82.
C
Select the position.
Press
rt w e
broadcasting scrambled programmes, then press OK
twice.
D
Change the decoder setting.
Press until "OFF" (decoder setting) begins blinking,
e
and set it to "ON" by pressing
E
Return to the Confirmation screen.
Press OK.
Repeat steps C – E as necessary.
F
Close the Confirmation screen.
Press MENU.
INFORMATION
If you live in Eastern Europe, "TV SYSTEM" setting appears
instead of "DECODER" setting on the Manual Channel Set
screen. When you can see the picture but can hear no audio,
select appropriate TV system (D/K or B/G). Normally, TV
programmes are broadcasted as follows.
until
rt
For Eastern Europe : D/K
For Western Europe : B/G
A Select a country in Eastern Europe in step E on page 80.
B Press
Manual Channel Set screen in step E on page 82.
C Press
SUBSIDIARY SETTINGS (cont.)
A C
and of "Manual Channel Set" on
to select the channel position
rt
until the TV system (D/K or B/G) blinking on the
e
to select appropriate TV System (D/K or B/G).
rt
pg. 65).
.