Recording/Playback On Vhs Deck; Basic Recording - JVC HM-HDS1EU Instructions Manual

Hdd & s-vhs video recorder
Hide thumbs Also See for HM-HDS1EU:
Table of Contents

Advertisement

30
EN

Basic Recording

Turn on the TV and select the AV mode.
If the recorder is turned on with HDD deck selected,
there may be about 30 seconds' delay in starting to
show pictures on the screen.
NOTE:
It is not possible to record a TV programme on both the HDD
deck and the VHS deck simultaneously. In addition, it is not
possible to record simultaneously from the same external input.

RECORDING/PLAYBACK ON VHS DECK

A
Load a cassette.
Insert a cassette with the record safety tab intact.
Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
pointed toward the recorder.
Do not apply too much pressure when inserting.
The recorder's power comes on automatically.
While "– – – –" is blinking on the front display panel, the tape
will run for a few seconds to search for the tape number.
If you want to use VCR Navigation to select the programme
after recording with this recorder, set "NAVIGATION" to "ON"
(
pg. 75).
B
Select the VHS deck.
Press S-VHS.
The S-VHS button lights on the recorder.
C
Choose a programme.
Press PR +/– or the number keys to select the channel
you wish to record.
D
Set the tape speed.
Press MODE (
). Check the SP/LP/EP indicator on the
p
recorder's front display panel to confirm the selected tape
speed.
In EP mode, the recording time is extended three times.
If you record a programme in EP mode on this recorder, it is
recommended to play back the EP-recorded tape on this
recorder.
It is not possible to select EP mode if "COLOUR SYSTEM" is
(
set to "MESECAM".
pg. 76
E
Start recording.
Press and hold
and press
7
press
on the recorder.
7
The VHS recording indicator lights on the recorder.
B.E.S.T. takes place at the beginning of both the first SP and
the first LP (or EP) recording after inserting the cassette.
(
pg. 41)
If "DIRECT REC" is set to "ON", the programme that appears
on the TV screen will be recorded (
F
Pause/Resume recording.
Press
. Press
to resume recording.
9
4
G
Stop recording.
Press
. Then press
to remove the cassette.
8
)
on the remote control, or
4
pg. 78).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents