JVC HM-HDS1EU Instructions Manual page 63

B
Select the recording deck.
Press HDD or S-VHS.
C
Set the recorder's input mode.
Press AUX (number key "0") and/or PR to select "F-1".
Set "F-1 INPUT" to "VIDEO" for the VIDEO input connector,
or "S-VIDEO" for the S-VIDEO input connector, depending on
the connector being used (
D
Set the edit mode. (VHS deck only)
See "PICTURE CONTROL" on page 77.
E
Start the camcorder.
Engage the Play mode of the camcorder.
F
Start the recorder.
Engage the Record mode of the recorder.
NOTES:
All necessary cables can be obtained from your dealer.
When you select "EDIT" to dub tapes in step D, be sure to
select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF")
after you finish dubbing the tapes.
For HDD deck, the recording pause takes effect only when the
recorder is recording on the HDD deck with the channel set to
"L-1", "F-1", or "DUB". The recording pause is released in 5
minutes automatically. Picture and sound may be distorted at
the point where the recording pause is released.
63
EN
pg. 65).