Remote Control Functions - JVC HM-HDS1EU Instructions Manual

48
EN
Remote A/B/C/D Code Switching
The remote control is capable of controlling four JVC video
recorders independently. Each of recorders can respond to one
of four codes (A, B, C or D). The remote control is preset to send
A code signals because your video recorder is initially set to
respond to A code signals. You can easily modify your video
recorder to respond to B, C or D code signals.
LCD panel

REMOTE CONTROL FUNCTIONS

On the remote control
A
Display the code.
Press and hold HDD on the remote control for over 2
seconds. The code currently set blinks on the LCD panel.
B
Change the remote control code.
Press the number key "1" for A, "2" for B, "3" for C or
"4" for D.
C
Set the remote control code.
Press OK to set the code.
On the recorder
D
Display the code.
Press on the recorder for over 5 seconds while the
4
recorder is turned off. The code currently set appears on
the front display panel.
If the code displayed on the front display panel is different
from the code set on the remote control, go to step E.
E
Change the recorder's code.
Press on the remote control. The code currently set on
8
the remote control will be applied to the recorder.