Delete A Channel - JVC HM-HDS1EU Instructions Manual

F
Input the channel.
Press the number keys to input the channel number you
want to store.
Input "0" before any single number entries.
To input the registered station name (ID –
until "– – – –" (ID setting) begins blinking, then press
For fine tuning adjustment, press
rt
then press . While tuning, "+" or "–" appears.
When storing a channel that sends scrambled broadcasts,
e
press until "OFF" (Decoder setting) blinks, then press
to set "DECODER" to "ON" ("OFF" is the default setting).
When "L-2 SELECT" is set to "A/V" or "SAT", the "DECODER"
setting cannot be changed (
G
Enter new channel information.
Press OK and the Confirmation screen appears.
Repeat steps D – G as necessary.
H
Close the Confirmation screen.
Press MENU.
To change positions, see "Change Station Channel Position"
( pg. 84).
If you wish to set station names other than the ones registered
in your recorder, see "Set Stations (B)" (
ATTENTION
Guide Program numbers are not set when channels are
stored manually. If an attempt is made at timer programming
with the S V system in this state, "SET GUIDE PROG
HOW IEW
THEN RETRY" appears on the TV screen; set the Guide
Program Numbers ( pg. 79) manually.
pg. 87), press
rt
e
until "+/–" begins blinking,
rt
pg. 65).
pg. 85).

Delete A Channel

Perform steps A and C of "Manual Channel Set" on page 82
to access the Confirmation screen before continuing.
A
e
Select the item.
.
rt w e
Press until the item you want to delete begins
blinking.
B
Delete a channel.
&
Press .
The item directly beneath the cancelled one moves up one
line.
Repeat steps A and B as necessary.
C
Close the Confirmation screen.
Press MENU.
83
EN