System Connections; Connecting To A Satellite Receiver - JVC HM-HDS1EU Instructions Manual

70
EN

Connecting To A Satellite Receiver

Simple Connections
This is an example of simple connection if your TV has
one 21-pin AV input (SCART) connector.
Connect the satellite receiver to the AV2 (L-2) IN/
DECODER connector, then connect the AV1 (L-1) IN/
OUT connector to the TV's connector.
Back of TV
IMPORTANT
When you set "L-2 SELECT" to "SAT" (
the recorder is turned off. When the recorder is in Stop mode or recording, press TV/VCR on the remote control to turn off the VCR
indicator on the front display panel.
If you turn on the recorder when the satellite receiver's power is off, nothing appears on the TV screen. In this case, turn on the
satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the recorder to the video mode.
Aerial
connector
ANTENNA IN
ANTENNA OUT
21-pin SCART connector
AV1 (L-1) IN/OUT ENTREE/SORTIE
ANTENNA
ANTENNE
IN
ENTREE
IN/DECODER
AV2 (L-2)
OUT
ENTREE/DECODEUR
SORTIE
pg. 65), it is possible to view a satellite broadcast with the TV set to its AV mode even if
NOTES:
Set "L-2 SELECT" to "A/V" (
You can use Automatic Satellite Programme Recording
function ( pg. 47) with this connection.
To record a programme via the satellite receiver, select L-2
mode by pressing AUX (number key "0") and/or PR so that
"L-2" appears on the front display panel.
For details, refer to the instruction manual of the satellite
receiver.
Aerial
TV aerial
cable
OUT
S
SORTIE
AUDIO
L
OUT
SAT CONTROL
SORTIE
CONTROLEUR SAT
R

SYSTEM CONNECTIONS

pg. 65).
Outdoor unit
Satellite cable
Satellite receiver
TV VCR DECODER
Mains outlet
Back of recorder