Normal Dubbing (From Hdd To Vhs) - JVC HM-HDS1EU Instructions Manual

58
EN
Normal Dubbing
(from HDD to VHS)
You can dub selected scenes from the HDD deck to a cassette,
starting and stopping wherever you wish.
A
Load a cassette.
Insert a cassette with the record safety tab intact.
B
Prepare the HDD deck for dubbing.
A Press HDD and select the programme to be dubbed.
You can select the programme by HDD Navigation.
( pg. 24)
B Press PR+/– to set the channel other than "DUB".
C
Locate the start point.
A Search for the point where you want to start dubbing
by pressing 4, 5 or 3 then press 8.
B Press
a little, then press
3
C Press
to pause playback a little before the start
9
point.
D
Prepare the VHS deck for dubbing.
A Press S-VHS.
B Press PR+/– to set the channel "DUB".
C Press MODE (
) to select tape speed.
p
D Search for the point where you want to start dubbing
by pressing 4, 5 or 3 then press 8.
E
Start dubbing.
A Press HDD and
to start playback.
4
B Press S-VHS and
(
7 7
to start dubbing.
F
End dubbing.
Press . Then press HDD and press
8
NOTES:
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
The superimposed indication during the operation or dubbing
is not recorded.
EDITING (cont.)
to start playback.
4
and on the remote control)
4
.
8