Show Arp - D-Link xStack DXS-3250 Cli Manual

D-Link CLI Reference Guide

show arp

The show arp Privileged EXEC mode command displays entries in the ARP table.
Syntax
show arp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays entries in the ARP table.
Console# show arp
ARP timeout: 80000 Seconds
Interface IP address
--------- ----------
1/1 10.7.1.102
2/1 10.7.1.135
HW address
-----------------
00:10:B5:04:DB:4B
00:50:22:00:2A:A4
Page 152
Status
-------
Dynamic
Static