Table of Contents
Advertisement
CHAPTER 2.
PREPARATION FOR USE
2-1.
INTRODUCTION
This chapter provides instructions for preparing the iSBC 86/14 and the
iSBC 86/30 Single Board Computers (hereafter referred to together as the
iSBC 86/14/30 board) for use in a user-defined environment.
Included in
this chapter are instructions on unpacking and inspection; installation
considerations; component installation; jumper configuration; interface
configuration for the Multibus, the iSBX bus, and the serial bus
interfaces; connector information; serial I/O cabling information; board
installation information; and the differences between the iSBC 86/12A and
the iSBC 86/14/30 boards.
Ensure that you have a firm understanding of
the contents of Chapters 1 and 4 of this manual before beginning the
configuration and installation procedures contained in this chapter.
2-2.
UNPACKING AND INSPECTION
Inspect the shipping carton immediately upon reciept for evidence of
mishandling during transit.
If the shipping carton is severely damaged
or waterstained, request that the carrier's agent be present when the
carton is opened.
If the carrier's agent is not present when the carton
is opened and the contents of the carton are damaged, keep the carton and
the packing material for the agent's inspection.
For repair to a product damaged in shipment, contact the Intel Technical
Support Center to obtain a Return Authorization Number and further
instructions.
A purchase order will be required to complete the repair.
A copy of the purchase order should be submitted to the carrier with your
claim.
It is suggested that the salvageable shipping cartons and packing
material be saved for future use in the event that the product must be
shipped.
2-3.
INSTALLATION CONSIDERATIONS
Installation considerations such as power, cooling, and physical size
requirements, are outlined in the following paragraphs.
2-1
Advertisement
Table of Contents
