Sound; Display - Panasonic Diga DMR-EZ45VEBS Operating Instructions Manual

Hide thumbs Also See for Diga DMR-EZ45VEBS:
Table of Contents

Advertisement

FUNCTIONS
FUNCTIONS
To Others
Setup
Dynamic Range Compression
Bilingual Audio Selection
Tuning
Digital Audio Output
Disc
Audio Mode for XP Recording
Picture
Audio Mode for DV Input

Sound

Display

Connection
SELECT
VHS
Others
ENTER
Setup
Digital Audio Output
PCM Down Conversion
Tuning
Dolby Digital
Disc
DTS
Picture
MPEG
Sound
Display
Dolby Digital
Connection
SELECT
VHS
Bitstream
Others
ENTER
RETURN
PCM
Setup
DVB Preferred Subtitles
On-Screen Messages
Tuning
Grey Background
Disc
FL Display
Picture
Sound
New Service Message
Display
Connection
SELECT
TAB
VHS
Others
RETURN
SETUP
Setup
Off
Sound
M1
Dynamic Range Compression
Dolby Digital
On: The level of quieter passages increases and the level of louder passages
Stereo1
decreases. The audio can be clearly understood even when the volume is lowered.
Bilingual Audio Selection
TAB
If you want to record programmes that are broadcast in dual-channel sound, you can
RETURN
select between the original language [M1] or another available language [M2]. If you
are copying from an external source or from a tape position, select the sound track on
the other unit.
Digital Audio Output
Select the appropriate setting if you have connected an external unit to the
Off
DIGITAL AUDIO OUT of the DVD Recorder.
Bitstream
PCM Down Conversion
Bitstream
PCM
Select the audio output mode for a scan frequency of 96 kHz or 88.2 kHz. Despite this
setting, signals are converted to 48 kHz or 44.1 kHz if they have a scan frequency over
96 kHz or 88.2 kHz or if the disc is copy-protected.
On: The connected unit cannot process signals with a scan frequency of 96 kHz or
88.2 kHz. Signals are converted with 48 kHz or 44.1 kHz.
Off: The connected unit can process signals with a scan frequency of 96 kHz or 88.2
kHz. Signals are output as 96 kHz or 88.2 kHz.
Dolby Digital, DTS, MPEG
Bitstream: The connected unit can decode the corresponding signal.
PCM: If the connected unit cannot decode the corresponding signal, the setting must be
changed to [PCM]. Otherwise, the loud noise can lead to damage to your hearing or
loudspeakers. Make the necessary changes depending on your audio system.
Audio Mode for XP Recording
Selection of the audio type when copying in XP mode.
The picture quality of LPCM recordings may be worse than with normal recordings in XP
mode.
Audio Mode for DV Input
Select the audio type when copying from the DV input.
Stereo 1: Original sound; Stereo 2: Voice-over, Mix: Original sound + voice-over
English
Display
5 sec
DVB Preferred Subtitles
On
Bright
Select the language of the subtitles.
Automatic
On-Screen Messages
Automatic: The on-screen displays are displayed on the screen.
Grey Background
On: The grey background is displayed when there is no television reception.
FL Display
Dim: The display goes dark during playback. It lights up again when a button is
pushed. If the unit is switched off, the display turns off.
New Service Message
Off: The Service Messages are not shown.
DVD
Setting
ENTER
[On] [Off] (Dolby Digital Only)
DVD-V
[M 1] [M 2]
-R
-RW(V)
+R
+R DL
+RW
-R DL
[PCM Down Conversion]
[Dolby Digital] [DTS] [MPEG]
[On] [Off]
[Bitstream] [PCM]
[Dolby Digital] [LPCM]
[Stereo 1] [Stereo 2] [Mix]
-R
-R DL
-RW(V)
+R
+R DL
+RW
Setting
ENTER
[English] [Welsh] [Gaelic]
[Off] [3 sec] [5 sec] [7 sec] [10 sec]
[On] [Off]
[Bright] [Dim]
[Automatic][Off]
SD
VHS
Option
ENTER
Option
ENTER
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents