Connection With Hdmi Cable - Panasonic Diga DMR-EZ45VEBS Operating Instructions Manual

Connection with HDMI cable (not included)
Use one of the included RF coaxial cable (black or grey) to connect this unit's RF IN terminal to your aerial socket or aerial cable.
To the aerial
This unit's rear panel
AC IN
To household mains socket
(AC 220 V to 240 V, 50 Hz)
AC mains lead (included)
4
Connect only after all other
connections are complete.
To household mains socket
4
14
The HDMI connection can be used only with units that are suited for HDMI.
1
Connect the aerial to RF IN (Aerial input) of the DVD Recorder.
2
Connect RF OUT (Aerial output) of the DVD Recorder with the
aerial input of the TV.
3
Connect HDMI AV OUT of the DVD Recorder with the HDMI input of the TV.
For Q Link functions:
Connect the AV1 terminal (21-pin Scart terminal) of the DVD Recorder with the
Scart input of the TV.
4
Connect the DVD Recorder and the television to the power supply system.
After completing the above connections, proceed to the Auto-Setup,
to tune in TV channels.
RF coaxial cable (included, grey)
RF coaxial cable (included, black)
AV OUT
L
OPTICAL
VIDEO OUT
R
AUDIO OUT
3
HDMI cable
Only use fully wired
showing the HDMI logo. Use cable of
max. 5 m in length to avoid
interference with the video signal.
HDMI IN
Television's rear panel
1
or
1
COMPONENT VIDEO OUT
S VIDEO OUT
AV 2 (EXT) AV 1 (TV)
HDMI cables
To this unit
RF IN
Y
P
B
P
R
RF OUT
2 RF coaxial cable
(included, black)
The RF cable cannot be
used for showing pictures
from the DVD Recorder.
The unit must be connected
by another means e.g.
Scart cable to show pictures
from the DVD Recorder on
the television set.
RF IN
11