Setup - Panasonic Diga DMR-EZ45VEBS Operating Instructions Manual

FUNCTIONS
FUNCTIONS
To Others
Owner ID
PIN number
* * * *
Name
House No
Postcode
RETURN
RETURN: leave

Setup

System Update
EPG Download in Standby
Tuning
Software Update in Standby
Disc
Software Update Search Now
Picture
Sound
DVB Version: 0.38
Display
Connection
SELECT
VHS
ENTER
Others
RETURN
System Update
A new software has been found.
Update your software?
Yes
No
Initialize
Shipping Condition
Default Settings
SETUP
Setup
Others
Owner ID
To set the PIN number press . Use
Press
Make sure that you will remember the PIN number (make a note of it).
Press the ENTER button to confirm.
Select [Yes] with
Press . Enter the [Name], [House No] and [Postcode] in the same way, using
Press the ENTER button to confirm each entry.
Press the RETURN button to leave the Owner ID screen.
To display the Owner ID information on TV
On the unit press STOP for more than 5 seconds.
The PIN number is not displayed.
After 30 seconds this menu automatically disappears.
System Update
On
On
EPG Download im Standby-Modus
On: EPG data are loaded in standby mode.
Software Update in Standby
The software is automatically updated when the unit is in standby mode. This is
shown in the unit display. If the unit is in standby to record, the timer-controlled
recordings are not affected. If you want to prevent the automatic updates, select the
setting [Software Update in Standby - Off].
Software Update Search Now
Start the search for new software manually.
A new software version is announced by a message. Do not switch your unit off during
the update. This could result in the loss of data. A message shows that the update has
finished. If a new software version is not going to be broadcast until the next few days, a
corresponding message also appears.
Initialize
Shipping Condition: All settings, except for the security levels with the associated
password and the time settings and the owner ID, are reset to the factory-default settings.
Default Settings: All settings, except for the programmed channels, time and disc-
language settings, the security levels including password and the remote control code
and the owner ID, are reset to the factory-default settings.
Owner ID
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
to correct the digit.
and confirm with ENTER.
DVD
VHS
Option
ENTER
to enter a four-digit PIN number.
9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9
[On] [Off]
[On] [Off]
[Shipping Condition] [Default Settings]
SD
ENTER
.
67