Others - Panasonic Diga DMR-EZ45VEBS Operating Instructions Manual

FUNCTIONS
FUNCTIONS
Setup
Remote Control
Clock
Tuning
Owner ID
Disc
Picture
System Update
Sound
Initialize
Display
Connection
Remote Control
VHS
SELECT
TAB

Others

DVD 1
DVD 2
DVD 3
SELECT
ENTER RETURN
Clock
Time
10 : 52 : 04
Please set the clock.
ENTER : access RETURN : leave
CHANGE
ENTER
RETURN
66
SETUP
Setup
To Others
Others
DVD 1
Remote Control
Setting the remote control
If you use another Panasonic unit at the same location, change the mode of the remote
control so that you can operate the units independently of each other.
Change the code of the remote control so that you can simultaneously
operate another Panasonic DVD unit.
RETURN
Set up the remote control for the unit.
Select [DVD 1, 2 or 3] with
Apply the selected setting [DVD 1, 2 or 3] to the remote control.
Press and hold ENTER and press the appropriate number button 1, 2 or 3 for at least
2 seconds.
Exit the menu with RETURN.
If the remote control setting does not match that of the unit, DVD 1, 2 or 3 appears on
the unit's display.
Press ENTER and press the appropriate number key 1, 2 or 3 simultaneously for
at least 2 seconds.
If you want to operate two units independently of each other using the same
remote control, then change the the remote control setting.
Clock
Automatic
On
Clock setting
Date
The clock will normally be set correctly during Auto-Setup however, under certain
20 / 03 / 2006
circumstances the DVD Recorder cannot set the clock automatically. In this case follow
the operation steps below to manually set the clock.
Switch with
Change with
Confirm the change with ENTER.
Don't forget to change summer time and winter time.
Activating the automatic time correction function
The correct time for the clock can be automatically maintained when the DVD Recorder
is tuned to a station that transmits a time signal.
Switch with
The automatic setting of the clock begins.
Under adverse reception conditions, etc., the Automatic time correction function may not
work. In this case the indication for Clock setting is automatically reset to [Off]. If the
reception conditions improve later on, it is possible to activate this function.
If the Clock setting is set to [On], do not set it to [Off], otherwise the automatic time
correction function is deactivated.
This DVD Recorder uses a 24-hour-clock.
In the event of a power failure an automatic back-up system maintains the clock for
approximate 60 minutes.
When the Clock setting is set to [On], the automatic time correction function checks and
if necessary adjusts the time several times every day. The automatic time correction
function only works when the DVD Recorder is in standby, it does not work in the Timer
Recording mode.
Setting
and confirm with ENTER.
automatic mode to [Off] and confirm with ENTER.
and Time and Date.
automatic mode to [On] and confirm with ENTER.
DVD
VHS
Option
ENTER
[DVD 1] [DVD 2] [DVD 3]
SD
ENTER