Connection With Hdmi Cable - Panasonic DMR-EX95V Operating Instructions Manual

Connection with HDMI cable (not included)
This unit's rear panel
AC IN
To household
mains socket
(AC 220 V to 240 V, 50 Hz)
4
To household
mains socket
4
16
The HDMI connection can be used only with units that are suited for HDMI.
1
Connect the aerial to RF IN (Aerial input) of the DVD Recorder.
2
Connect RF OUT (Aerial output) of the DVD Recorder with the
aerial input of the TV.
3
Connect HDMI AV OUT of the DVD Recorder with the HDMI input of the TV.
4
Connect the DVD Recorder and the television to the power supply system.
After completing the above connections, proceed to the Auto-Setup
to tune in TV channels.
AV OUT
L
OPTICAL
R
AUDIO OUT
AC mains lead
(included)
Connect only after all other
connections are complete.
Television's rear panel
VIDEO OUT
AV 2 (EXT)
HDMI cable
3
Only use fully wired
HDMI logo. Use cable of max. 5 m in length to
avoid interference with the video signal.
HDMI IN
1
RF IN
COMPONENT VIDEO OUT
Y
P
S VIDEO OUT
B
P
R
RF OUT
AV 1 (TV)
2
HDMI cables showing the
RF IN
E
11
RF coaxial cable
RF coaxial cable
(included)