Table of Contents
Advertisement
Basic Connection
You can enjoy high-quality picture and audio by adding the HDMI cable connection to the 21-pin Scart cable
connection between the unit and your TV on page 10, 11.
Connecting to a TV with an HDMI (High Definition Multimedia Interface) Cable
When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted,
enabling you to enjoy high quality, digital video and audio with just one cable. When connecting to an HDMI-
compatible HDTV (High Definition Television), the output can be switched to 1080p, 1080i or 720p HD video.
•
This unit incorporates HDMI™ (V.1.3 with Deep Colour) technology that can reproduce greater colour
gradation (4096 steps) when connected to a compatible TV.
A lower colour gradation (256 steps), without deep colour, will be reproduced if connected to a TV which does not
support deep colour.
The unit will automatically set appropriate output to suit the connected TV.
Video sources converted to 1920 × 1080 resolution, while of high quality, will exhibit somewhat lower subjective
•
image resolution than true, native 1080p full-HD sources. See dealer for details.
•
Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover).
•
When outputting 1080p signal, please use the HDMI cables 5.0 meters or less.
Regarding VIERA Link "HDAVI Control
When connecting with a Panasonic TV (VIERA) or a receiver equipped with the "HDAVI Control" function, linked
operations would be possible. [➔ 50, Linked Operations with the TV (VIERA Link "HDAVI Control™"/Q Link)]
•
This unit incorporates HDMI™ (V.1.3 with Deep Colour) technology.
•
It is recommended that you use Panasonic's HDMI cable.
Recommended part number: RP-CDHG10 (1.0 m), RP-CDHG15 (1.5 m), RP-CDHG20 (2.0 m), RP-CDHG30
(3.0 m), RP-CDHG50 (5.0 m), etc.
•
Non-HDMI-compliant cables cannot be utilized.
Rear of this unit
Rear of satellite receiver
•
Set "Digital Audio Output" to "HDMI and Optical" (➔ 83). (The default setting is "HDMI and Optical".)
To enjoy High Quality Video up-converted to 1080p, you need to connect the unit to 1080p compatible HDTV and
set "HDMI Video Format" in the Setup menu to "1080p" (➔ 83).
Notes
•
If connecting to equipment that is only compatible with 2 channel audio output, audio with 3 channels or more will be down-
mixed (➔ 104) and output as 2 channels, even if connecting with an HDMI cable (some discs cannot be down-mixed).
•
For display units compatible with HDCP (High-Band width Digital Content Protection) that are equipped with a
digital DVI input terminal (PC monitors, etc.):
Depending on the unit, picture may not display properly or at all when connecting with a DVI/HDMI switching cable
(audio cannot be output).
12
Downloaded From Disc-Player.com Panasonic Manuals
RQT9089
HDMI IN
Rear of TV
HDMI cable
(not supplied)
DMR-EZ98VEBK
DMR-EX98VEBK
PR 0 0 0 0 01010
PR 0 0 0 0 01010
SER NO.
SER NO.
AV OUT
COMPONENT VIDEO OUT
Y
P
P
B
R
S VIDEO
OPTICAL
R-AUDIO-L
VIDEO
DIGITAL AUDIO OUT
AV 2 (EXT)
(PCM/BITSTREAM)
OUT
21-pin Scart cable
(not supplied)
AV
" function
TM
Connecting with a Panasonic TV
AV
(VIERA)
If the 21-pin Scart cable is connected,
the following functions are available.
•
Direct TV Recording (➔ 29)
•
Watching pictures from satellite
receiver (➔ 19)
(In this case, make sure to switch
the television input to "AV".)
RF
IN
RF
OUT
AV 1 (TV)
Advertisement
Table of Contents
