Connecting To A Tv With An Hdmi (High Defi Nition Multimedia Interface) Cable - Panasonic DIGA DMR-EX768EB Operating Instructions Manual

Hide thumbs Also See for DIGA DMR-EX768EB:
Table of Contents

Advertisement

Basic Connection
 You can enjoy high-quality picture by adding the HDMI cable connection to the 21-pin Scart cable connection
between this unit and your TV on page 10, 11.
Connecting to a TV with an HDMI (High Defi nition Multimedia Interface) Cable
When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted,
enabling you to enjoy high quality, digital video and audio with just one cable. When connecting to an HDMI-
compatible HDTV (High Defi nition Television), the output can be switched to 1080p, 1080i or 720p HD video.
 This unit incorporates HDMI
gradation (4096 steps) when connected to a compatible TV.
A lower colour gradation (256 steps), without deep colour, will be reproduced if connected to a TV which does not
support deep colour.
The unit will automatically set appropriate output to suit the connected TV.
 Video sources converted to 19201080 resolution, while of high quality, will exhibit somewhat lower subjective
image resolution than true, native 1080p full-HD sources. See dealer for details.
 Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover).
Regarding VIERA Link "HDAVI Control
When connecting with a Panasonic TV (VIERA) or a receiver equipped with the "HDAVI Control" function, linked
operations would be possible. [
 It is recommended that you use Panasonic's HDMI cable.
Recommended part number: RP-CDHG10 (1.0 m), RP-CDHG15 (1.5 m), RP-CDHG20 (2.0 m), RP-CDHG30
(3.0 m), RP-CDHG50 (5.0 m), etc.
Non-HDMI-compliant cables cannot be utilised.
Connecting with a Panasonic
TV (VIERA)
If the 21-pin Scart cable is
connected, the following
functions are available.
 Direct TV Recording (
 Watching pictures from
satellite receiver (
(In this case, make sure to
switch the television input
to "AV".)
Rear of satellite receiver
 Set "Digital Audio Output" to "HDMI and Optical" (
(The default setting is "HDMI and Optical".)
To enjoy High Quality Video up-converted to 1080p, you need to connect the unit to 1080p
compatible HDTV and set "HDMI Video Format" in the Setup menu to "1080p" (
Notes
 If connecting to equipment that is only audio compatible with 2 channel audio output, audio with 3 channels or more will be
down-mixed (
 For display units compatible with HDCP (High-Band width Digital Content Protection) that are equipped with a digital DVI
input terminal (PC monitors, etc.):
Depending on the unit, picture may not display properly or at all when connecting with a DVI/HDMI switching cable (audio
cannot be output).
Downloaded From Disc-Player.com Panasonic Manuals
12
TM
(V.1.3 with Deep Colour) technology that can reproduce greater colour
40, Linked Operations with the TV (VIERA Link "HDAVI Control
AV
25)
18)
Y
P
B
AV1
(TV)
P
R
COMPONENT
COMPONENT
A
UDIO OUT
DIO OU
(PCM/BITSTREAM)
STREAM)
VIDEO OUT
VIDEO OUT
AV2 (EXT)
AV
84) and output as 2 channels, even if connecting with an HDMI cable (some discs cannot be down-mixed).
TM
" function
HDMI IN
Rear of TV
HDMI cable
(not included)
R-AUDIO-L
VIDEO
S VIDEO
A A V OU
V OUT T
Rear of this unit
65).
65).
TM
"/Q Link)]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents