Table of Contents
Advertisement
Error Messages
The following error messages appear if incorrect operation is performed or an abnormality occurs with the
VIVID 910. If an error message appears, take the appropriate corrective actions as shown in the table below.
If the problem still does not disappear, contact a KONICA MINOLTA SENSING-authorized service facility.
Error Message
(Alphabetically)
AF/AE ERROR
LASER BARRIER
MAY BE CLOSED
PRESS ANY KEY
AF ERROR
LOW CONTRAST
PRESS ANY KEY
BACKUP ERROR
PRESS ANY KEY
CAUTION
LASER SCANNER IS
OUT OF ORDER
PLEASE TURN OFF
CHANGE LENS
TELE S/N ********
M ID D L E S/N ********
WIDE S/N ********
PRESS ANY KEY
CLOCK ERROR
PRESS ANY KEY
DIRECTORY FULL
PLEASE INSERT
ANOTHER MEMORY CARD
OR
PRESS ANY KEY
ERROR
OUT OF DISTANCE RANGE
PRESS ANY KEY
INVALID FORMAT
PLEASE INSERT
ANOTHER MEMORY CARD
OR
PRESS ANY KEY
LIGHT IMPROPER
NO FREE SPACE
PLEASE INSERT
ANOTHER MEMORY CARD
OR
PRESS ANY KEY
NO MEMORY CARD
PLEASE INSERT
A CARD
OR
PRESS ANY KEY
54
Meaning
Auto-focus or auto-exposure failed.
Press any key.
Auto-focus failed due to low contrast
of the object. Press any key.
Failed to back up the data.
Press any key.
The laser beam is not emitted prop-
erly. Turn off the power immediately.
The lens is now being replaced.
Press any key.
The clock is abnormal.
Press any key.
The maximum allowed number of
files has already been stored. Replace
the compact flash card with a new
one, or press any key.
The object is not located within the
specified object distance range. Press
any key.
The memory card has not been ini-
tialized.
Press any key.
Insufficient amount of light
There is insufficient unoccupied
capacity on the memory card.
Press any key.
No memory card is inserted.
Insert another memory card or press
any key.
Action
Remove the laser cap.
In the case of an object for which it is dif-
ficult to acquire correct images, set the
focus lock or manual focus.
In the case of an object for which it is dif-
ficult to acquire correct images, set the
focus lock or manual focus.
All the settings will be initialized, so set
them again.
Highly dangerous! Turn off the power
immediately and contact a KONICA
MINOLTA SENSING-authorized service
facility.
Attach the lens hood properly.
Check the serial No. of the lens, and
replace the lens properly.
The date/time data will be initialized, so
set it again.
Insert a memory card that has sufficient
unoccupied memory capacity.
Delete files from the currently inserted
memory card.
Place the object in a position 0.5 m to 2.5
m away from the VIVID 910.
Insert an initialized memory card into the
slot or initialize the current memory card.
(It is not possible to initialize a memory
card using the VIVID 910.)
Illuminate the object brighter and scan it.
Insert a memory card that has sufficient
unoccupied memory capacity.
Delete files from the currently inserted
memory card.
Insert a memory card into the slot.
Advertisement
Table of Contents
