Konica Minolta Vivid 910 Instruction Manual page 57

Non-contact 3d digitizer
Hide thumbs Also See for Vivid 910:
Table of Contents

Advertisement

Error Message
(Alphabetically)
MEMORY CARD IS
EJECTED
PRESS ANY KEY
MEMORY CARD IS
EJECTED
RECORDING IS CANCELED
PRESS ANY KEY
SAME FILE NAME
SYSTEM ERROR
PLEASE TURN OFF
TERMINATE ERROR
PRESS ANY KEY
SET TERMINATE ENABLE
UNKNOWN MEMORY
CARD
PLEASE INSERT
ANOTHER MEMORY CARD
OR
PRESS ANY KEY
WB ERROR
LIGHT IMPROPER
PRESS ANY KEY
Meaning
The memory card has been ejected.
Press any key.
The memory card has been ejected.
Press any key.
A file of the same file name already
exists.
A system error has occurred.
Turn OFF the power.
SCSI terminator error has occurred.
Press any key and set the terminator
to "ENABLE".
The currently inserted memory card
is not suitable for the VIVID 910.
Insert another memory card or press
any key.
Failed to adjust white balance.
Press any key.
Error Messages
Action
Insert a memory card into the slot.
Insert a memory card into the slot.
Specify another file name.
Turn OFF the power, then turn it ON
again. If the problem still does not disap-
pear, contact a KONICA MINOLTA
SENSING-authorized service facility.
Set the terminator to "ENABLE".
Insert a suitable memory card into the
slot.
Adjust white balance in a bright place.
(White balance in effect before occur-
rence of this error has not been updated.)
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vi-910

Table of Contents