Table of Contents
Advertisement
Scanning the Object
7
Press
The procedure is now complete.
M
emo
• If high quality mode is set to OFF (digitize mode), data outside the measurement range will be displayed in yel-
low on the range image.
• If high quality mode is set to ON, data outside the measurement range will be eliminated, therefore it will not be
displayed on the screen.
• If the part that you want to input is displayed in yellow or does not appear as the range image in the display at
all, press
34
.
to cancel the scan. Then adjust the laser power and gain setting and try scanning again.
Advertisement
Table of Contents
