Setting the Date and Time
Once the date and time are set, the date and time on which scan was performed will also be saved when image
data is saved.
M
emo
When the VIVID 910 is used for the first time after purchase or if it has not been used for some time, the date/time data
might have been lost. If so, it must be set again.
N
ote
• If the date/time data has been lost, "CLOCK ERROR" will appear after power is turned ON. In this case, press any
key and proceed to step 4 to set the date and time.
• The backup battery for the date/time data is charged while the power to the instrument is ON.
[Setting Procedure]
1
Press
.
The MENU view will appear.
2
Press
to locate the arrow cursor to
"CAMERA SETTINGS".
3
Press
.
The CAMERA SETTINGS view will appear.
4
Press
to locate the arrow cursor to
"CLOCK".
5
Press
.
The currently set month will turn to pink.
6
Press
to select the date/time item
(month, date, year, hour, minute, second) to
be set (or changed).
The item currently displayed in pink can be set (or
changed).
15