Fax Parameters - Panasonic DP-C406 Operating Instructions Manual

Fax Parameters

The contents of Fax Parameter may differ depending on the each country's regulation or specification.
No. 0 - 39
No. Parameter
00 Print Fax ParameterList
01 Density (HOME)
02 Resolution (HOME)
03 Original (HOME)
04 Stamp (HOME)
05 Memory (HOME)
06 Dialling Method
Comments
Print the Fax Parameter List.
To cancel printing the parameter setting list,
select "Stop" and "OK".
While processing the cancellation, panel
operation is denied, and an error beep is
produced.
The feeding paper(s) will be ejected before
completing the above cancellation operation.
If setting a parameter, an asterisk mark (*) will
be added before the parameter number.
Set the default density according to the most-
used original.
Set the default resolution according to the most-
used original.
When installing the optional Fax
Communication Board, the standard setting
can be changed.
Set the default of original type according to the
most-used original.
When set to "On", all successfully transmitted
originals are stamped (Memory or Direct
transmission).
In order not to stamp the memory transmitted
originals, set "28 Stamp At Memory XMT" to
"Invalid".
Set the default for Memory transmission.
When set to "Off", originals are transmitted
directly without being stored into memory first.
Select a dialling method according to your
telephone line.
This feature is available in certain countries
only.
Selective Item Standard
Setting
Stop, Start Start
-3, -2, -1, 0, 1, 2, 3 0
STD, Fine, S-Fine Fine
Text, Text
Txt/Pht (Text/Photo),
Photo
Off, On Off
Off, On On
Tone, Pulse Tone
45