Panasonic DP-C406 Operating Instructions Manual page 50

No. Parameter
46 Select Receive
48 Telephone Line
49 PSTN Access Code
51 Remote Diagnostic
52 Diagnostic Password
53 Sub-Address Password
54 Fax Forward
56 Cover Sheet (HOME)
68 Dial Tone Check
77 Department Code
50
Comments
Enable or disable Selective Reception.
When "Valid" is set, the machine will receive
only when the sender's address has been
programmed in the Address Book.
Refer to Example : Select Receive (see
page 64).
Select the type of the connected.
This feature is available in certain countries
only.
When "48 Telephone Line" is set to "PSTN",
set PSTN Access Code.
This feature is available in certain countries
only.
Enable or disable the Remote Diagnostic.
Set the Diagnostic Password.
Set the Sub-Address Password.
Set whether the machine performs the Fax
Forwarding to the specified destination.
Set the default cover sheet.
When "Cover Sheet" and "Cover Sheet
Message" are set to "On", enter characters.
60 characters can be programmed for 1 line,
and up to 600 characters can be printed on
the cover sheet.
Printing area 60 characters / line Max. 10
lines
Set whether to detect dial tone before dialling
the telephone number.
Enable or disable the Department Management
function.
Selective Item Standard
Setting
Invalid, Valid Invalid
PSTN, PBX PSTN
Up to 4 digits
Invalid, Valid Valid
Consult with the authorised
Panasonic dealer on how to use
this item.
Up to 20 digits
Invalid, Valid Invalid
Off, On Off
Off, On On
Invalid, Valid Invalid