Panasonic DP-C406 Operating Instructions Manual page 57

No. Parameter
151 Email Header FMT
152 Sub-Addr Routing
153 TSI Routing
154 Route Header FMT
155 Print Routed Doc
156 Print Forward Doc
157 Transaction JRNL
Comments
Set the header information to print when an
Email is received. (Normally used for
Troubleshooting. It shows the path of the Email
transmission before arriving at your machine.)
• All
All the header contents are printed.
• S/F/T
Only Subject, From and To are printed.
• Off
The header contents are not printed.
Set whether to automatically route a received
fax or Email using sub-address.
Set "Valid" for routing.
Set whether to route a received fax to a
telephone number or an Email address pre-
programmed in the Address Book using the
originating fax's numeric ID.
Set the contents of the "From" field when
transferring Email to a computer or internet fax
on the network by routing.
• Origi
Sender information is printed.
• Rly Stn
Relay station information is printed.
Set whether to print a received original
designated to be routed.
• Inc Only
An original is printed only when the routing
operation has failed.
• Always
An original is printed whether the routing
operation has succeeded or failed.
Set whether to print a memory received original
designated for forwarding.
• Inc Only
An original is printed only when its memory
transfer has failed.
• Always
An original is printed whether its memory
transfer has succeeded or failed.
Set whether to transfer a communication journal
to a registered destination.
Selective Item Standard
Setting
All, S/F/T
S/F/T, Off
Invalid, Valid Invalid
Invalid, Valid Invalid
Origi, Rly Stn Origi
Inc Only, Always Inc Only
Inc Only, Always Inc Only
Invalid, Valid Invalid
57