Example : LDAP Server
To search an Email address or a fax number on LDAP server, the following user parameter settings are
required.
LDAP Server Name or LDAP Server IP
LDAP User Name
LDAP Password
LDAP Search Base
Set the above items according to the descriptions below.
For details about LDAP search, refer to Searching for a Destination in the Operating Instructions (For
Facsimile and Internet Fax) of provided CD-ROM.
This feature is available in certain countries only.
LDAP Server Name or LDAP Server IP
Set LDAP Server Name or IP Address according to the setting of "01 General (03 DNS)" in the
Network Settings.
1
Press the Function key.
2
Select "Network Settings".
92
04 LDAP: 00 LDAP Server
04 LDAP: 01 LDAP User Name
04 LDAP: 02 LDAP Password
04 LDAP: 03 LDAP Search Base
3
Enter the password (8 digits), and then
select "OK".
1
2