Key Operator Mode - Panasonic DP-C406 Operating Instructions Manual

Key Operator Mode

No. 0 - 19
No. Parameter
00 Print General Settings
01 Paper Size
02 A4R/A5 Size Selection Set the smallest paper size that can be fed from
05 Special Paper Tray 1
06 Special Paper Tray 2
07 Special Paper Tray 3
08 Special Paper Tray 4
09 Auto Paper Out Rotate Set whether to rotate the image and print when
10 Pap. Tray Priority(B/
W)
Comments
Print the list of General Settings.
To cancel printing the parameter setting list,
select "Stop" and "OK".
While processing the cancellation, panel
operation is denied, and a beep is produced.
The feeding paper(s) will be ejected before
completing the above cancellation operation.
If setting a parameter, an asterisk mark (*) will
be added before the parameter number.
Set the paper size and media type for Paper
Trays 1 - 4.
Select the Paper Tray, and then select "Change
Size / Media" to change the paper size.
Only A4 , B5 or 8.5x11 , is selectable for
Tray 1.
To change the preset paper size, consult with
the authorised Panasonic dealer.
Select "Change Type" to change the paper
type.
the Sheet Bypass.
Set the Paper Tray which will not be used as the
automatic document feeder tray.
Ex: When you load colour paper in Paper
Tray 1, select "Tray 1" not to be used for
automatic tray selection.
Up to 4 Paper Trays can be selected for
exclusion from automatic tray selection.
the selected Paper Tray is empty.
Ex: Printing on A4R size paper when there is
no A4 size paper
Set the Paper Tray Priority for black and white
copy or print job.
• S
Optional paper feed unit
• C
Paper tray of the main unit
• B
Sheet bypass
Selective Item
Stop, Start
• "Change Size"
A3 , B4 , A4 ,
A4 , B5 , B5 ,
A5 , 11x17 ,
Legal , 8.5x11 ,
8.5x11 , 5.5x8.5 ,
8x13 , 8.5x13
• "Change Type"
Plain, Glossy, Recycled,
Thick
A4R, A5
None, Tray 1,Tray 2, Tray
3, Tray 4, Bypass
Off, On
S>C>B, C>S>B
Standard
Setting
Start
A4R
None
None
None
None
Off
C>S>B
11