Example : Date Time Setting
When you set the date and time manually, follow the procedures below.
The clock of your machine is equipped with D.S.T. (Daylight Saving Time) system. Your clock will be
automatically set 1 hour forward on the last Sunday of March. At the end of the daylight saving time (on the last
Sunday of October), the clock will be reset to normal.
On occasion, the clock may need adjustment. (Lunar inequality : ±1 minute)
The date and time can be set automatically by synchronizing to NTP Server. Refer to "21 NTP" in the General
Settings See page 14.
"24 Daylight Time" in General Settings is available in certain countries only.
1
Press the Function key.
2
Select "General Settings".
3
Select "5-9".
28
4
Select "09 Key Operator Mode".
5
Enter the password (8 digits), and then
select "OK".
1
For details on how to set the password,
consult with the Key Operator.
2