Panasonic DP-C406 Operating Instructions Manual page 54

No. Parameter
135 Junk Fax Filter
136 Restrict Direct Dial
137 Re-enter Direct Dial
54
Comments
• 00 Junk Fax Filter
When set to "Valid", the machine will not
receive the faxes from the senders whose
numeric ID has been registered as junk fax
number.
• 01 Receive without ID No.
When set to "Valid", the machine will receive
the faxes from senders without numeric ID
registered.
This setting is available only when "00 Junk
Fax Filter" is set to "Valid".
• 02 Received ID Print
When set to "Valid", the sender's numeric ID
and received time are printed at the bottom of
the received faxes. If the sender's numeric ID
is not registered, only the received time is
printed.
This setting is available only when "00 Junk
Fax Filter" is set to "Valid".
• 03 ID No. Registration
Register fax numbers as junk fax number.
Up to 30 fax numbers can be registered for
junk fax number.
Up to 20 digits (including numerals, blank
space, and + symbol) can be registered for a
fax number.
When comparing the sender's numeric ID to
the registered junk fax numbers, blank spaces
between numbers and "0" at the beginning of
the number are ignored.
Enable or disable the Restrict Direct Dial
function.
When set to "Valid", manual input of destination
and the use of the "Redial" button are not
available.
When set to "Valid", manual input requires the
user to enter the destination twice, and
transmission takes place only when the entered
destinations are matched.
If the "Redial" button is selected, the Number
Pad screen appears prompting to enter the fax
number for confirmation.
The "Monitor" button cannot be used.
This setting is not available when the Restrict
Direct Dial function is set to "Valid".
Selective Item Standard
Setting
Invalid, Valid Invalid
Invalid, Valid Valid
Invalid, Valid Valid
No. 01 to 30
Invalid, Valid Invalid
Invalid, Valid Invalid