Panasonic DP-C406 Operating Instructions Manual page 82

No. Parameter
26 MCP Server
No. 30 - 39
No. Parameter
30 Sort
31 Staple
32 Hole Punch
35 Pre-Set Toner Save
36 Toner Save Level
82
Comments
When "01 General (03 DNS)" in the Network
Settings and "25 Use MCP Server" in Printer
Settings are set to "Yes", set MCP (Memory
Card Printing) server name.
When "01 General (03 DNS)" in theNetwork
Settings is set to "No", and "25 Use MCP
Server" in Printer Settings is set to "Yes", set
MCP (Memory Card Printing) server IP address.
The default port number is changed by setting
SSL.
Comments
Set the default sort.
Set the default staple.
Set the default hole punch.
Set whether to use the Pre-Set Toner Save
mode.
If the Raster mode is selected in the printer
driver when "Pre-Set Toner Save" is set to
"On", printing will be canceled.
This function is invalid for printing with the
PostScript3 Printer Driver.
When "35 Pre-Set Toner Save" is set to "On",
set the level of toner saving.
Selective Item Standard
Setting
Up to 60 characters
"SSL"
Off: 8083
On: 8084
Selective Item Standard
Setting
None, Sort, Group, Sort
Shift, Rot. Grp, Rotate
None, T Centre, Top L, None
Top R, Centre L,
Centre R, Saddle
(R: Right, L: Left, T:
Top)
None, Left, Top, Right None
Off, On Off
Level 1, Level 2, Level Level 3
3, Level 4, Level 5