Setup Screen; Setup; Audio & Video Setup; Video Profile - Samsung SNP-6200 User Manual

setup screen

SETUP

You can configure the audio & video, network, event and system settings of the camera via the
network.
1. In the Live screen, click [Setup (
2. The Setup screen appears.
AUDIO & VIDEO SETUP

Video profile

1. From the Setup menu, select the
<Audio & Video (
2. Click <Video profile>.
3. Select a <Video profile> number.
4. Click the input box of each item and
enter / select a desired value.

The context menu may differ depending on
the selected codec type.
• Default profile : This is the default
video profile.
• E-mail/FTP profile : Video profile to
be transferred to the specified email
or FTP site.

Only the MJPEG codec can be set as the
E-mail/FTP profile.

If you select the E-mail/FTP profile, the frame rate will be fixed to below 5.
• Record profile : This is the profile that is applied to video recording.
• Smart codec : Specify the use of Smart codec.

M
The Smart Codec will be active only if the codec is of H.264 and the compression system is
CBR.
5. When done, click [Apply (

M
In case of <Record profile> having larger resolution than 800x600 for MJPEG or target bitrates
bigger than 4800kbps for H.264, the <Normal> and <Event> settings for <SD record> is
changed to I-Frame automatically.
In such cases, applied setting remains even when the resolution or target bitrate is changed.

Profiles 1 and 2 are provided by factory default that cannot be deleted or renamed; besides, the
codec cannot be changed in any way.
)].
)> tab.
)].
English _65