Copying Mixed Size Originals From The Adf - Panasonic DP-C213I Operating Instructions Manual

Copying Mixed Size Originals from the ADF

Use this function when copying mixed size originals (8.5" x 11" and 11" x 17", or 8.5" x 11" and Legal)
using with the ADF, original size can be detected automatically then can be copied to the same size, or
one specified size.
8.5" x 11"-R and Legal
8.5" x 11" and 11" x 17"
When copying in 2-Sided mode.
Full Size
8.5" x 11"-R (Letter-R)
8.5" x 14" (Legal)
11" x 17" (Ledger)
If no copy size is specified, the original is copied to its original size. If the copy size is specified, the original is
copied automatically enlarged, or reduced in accordance with the specified size.
Only when specifying the same copy size, 2-Sided copying is possible by setting "2-Sided".
Only when specifying the same copy size (8.5" x 11" only), the copies can be rotated, and printed as a booklet,
or as a unit of specified number of pages by setting "Rotate-Sort" or "Rotate-Group".
1
Select "2-Sided / Original->Copy",
and then select "Multi-Size Feed".
To display this screen, refer to steps 1 to 3 of
Basic Operation for the 2-Sided Copy
Mode (see page 40).
Ex: Original Size (Standard Setting)
8.5" x 11"-R and Legal
8.5" x 11" and 11" x 17"
Reduction
8.5" x 11"-R (Letter-R)
8.5" x 11" (Letter)
8.5" x 11"-R (Letter-R)
Ex: Specified Size
8.5" x 11"-R
8.5" x 11"
2
Select an orientation, and then select
"OK".
Continue on the next page...
45