Quality Adjusting - Panasonic DP-C266 Operating Instructions Manual

Quality Adjusting

When printing directly from the SD Memory Card or USB Flash Memory, you can adjust the image
quality.
The following five quality adjustments are available.
• Contrast
• Brightness
• Saturation
You can adjust the image quality of JPEG files only.
The default settings can be changed with the Function Parameter "30 SD Print Settings" (Printer Settings >
General User Mode). Refer to Printer Settings in the Operating Instructions (For Function Parameters) of
provided CD-ROM.
Under the following situations, the Quality settings return to the standard settings.
- If the Reset key is pressed.
- If Auto Reset Time interval has lapsed (default = 1 min).
- If the power is turned OFF.
1
Select "More Settings".
To display "More Settings", refer to steps 1
to 6 of Printing from SD Memory Card
(see page 11) or steps 1 to 6 of Printing
from USB Flash Memory (see page 14).
2
Select "Quality Adj.".
Ex: When "More Settings" is selected in
"Thumbnail/Index Print" tab.
• Tint
• Color Balance
3
Select the desired quality setting and
adjust the setting, and then select
"OK".
• Contrast (see page 29)
• Brightness (see page 30)
• Saturation (see page 31)
• Tint (see page 32)
• Color Balance (see page 33)
Continued on the next page...
27