Setup Field(S) - Motorola Symbol MT2070 User Manual

Send Data (continued)
Send Next 19 Characters

Setup Field(s)

Setup Field(s) Definitions
Table 14-2
Parameter
Move Cursor
Move Cursor To a Character
Move Cursor to Start of Data
Move Cursor Past a Character
Skip Ahead "N" Characters
Skip Back "N" Characters
Send Preset Value
Description
Scan the Move Cursor To Character, then any printable ASCII
character from the Alphanumeric Keyboard on page
moves the cursor to the position after the matching character. If the
character is not there, the rule fails and ADF tries the next rule.
Scan this bar code to move cursor to the beginning of the data.
This action moves the cursor past all sequential occurrences of a
selected character. For example, if the selected character is 'A',
then the cursor moves past 'A', 'AA', 'AAA', etc. Scan the
Cursor Past Character, then select a character from the
Alphanumeric Keyboard. If the character is not there, the cursor
does not move (i.e., has no effect).
Scan one of these bar codes to select the number of positions
ahead to move the cursor.
Scan one of these bar codes to select the number of positions back
to move the cursor.
Send Values 1 through 6 by scanning the appropriate bar code. Set
these values using the prefix/suffix values in
8-19.
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
Advanced Data Formatting 14 - 29
Send Next 20 Characters
14-89. This
Move
Table 8-4 on page
Page Number
14-30
14-30
14-30
14-31
14-32
14-32