Setup Field(S) - Motorola Symbol DS3407 Product Reference Manual

12 - 30 Symbol DS3407 Product Reference Guide
Send Data (continued)
Send Next 19 Characters

Setup Field(s)

Setup Field(s) Definitions
Table 12-2
Parameter
Move Cursor
Move Cursor To a Character
Move Cursor to Start of Data
Move Cursor Past a Character
Skip Ahead "N" Characters
Skip Back "N" Characters
Send Preset Value
Description
Scan Move Cursor To Character, then any printable ASCII
character from the Alphanumeric
cursor to the position after the matching character. If the character
is not there, the rule fails and ADF tries the next rule.
Scan this bar code to move cursor to the beginning of the data.
This parameter moves the cursor past all sequential occurrences
of a selected character. For example, if the selected character is
'A', then the cursor moves past 'A', 'AA', 'AAA', etc. Scan
Cursor Past Character, then select a character from the
Alphanumeric Keyboard. If the character is not there, the cursor
does not move (i.e., has no effect).
Scan one of these bar codes to select the number of positions
ahead to move the cursor.
Scan one of these bar codes to select the number of positions
back to move the cursor.
Send Values 1 through 6 by scanning the appropriate bar code.
Set these values using the prefix/suffix values in
page 7-19.
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
Send Next 20 Characters
Keyboard. This moves the
Move
Table 7-4 on
Page
12-31
12-31
12-31
12-32
12-33
12-35