Default Rules; Adf Bar Codes - Motorola Symbol MT2070 User Manual

Note that using the standard data editing functions also creates ADF rules. Scan options are entered as ADF rules,
and the hierarchy mentioned above also applies to them. For the device, this applies to prefix/suffix programming
in the parameter Scan Data Transmission Format on page
These rules reside in the same "rule list" as ADF Rules, so the order you create them is also important.

Default Rules

Every unit has a default rule to send all scan data. Units with custom software may have one or more default rules
burned in. The rules hierarchy checks user programmable rules first, then the default rules. Disable default rules by
entering the following general rule in the user programmable buffer:
When receiving scan data, send all data.
Since this rule always applies, ADF never applies the default rules.

ADF Bar Codes

Table 14-1 lists the bar codes available through ADF.
ADF Bar Codes
Table 14-1
Special Commands
Pause Duration
Begin New Rule
Save Rule
Erase
Quit Entering Rules
Disable Rule Set
Criteria
Code Types
Code Lengths
1 Character - 6 Characters
7 Characters - 13 Characters
14 Characters - 20 Characters
21 Characters - 27 Characters
28 Characters - 30 Characters
Specific String at Start
Specific String, Any Location
Any Message OK
Parameter
Advanced Data Formatting 14 - 5
5-18.
Page Number
14-7
14-7
14-7
14-7
14-8
14-8
14-9
14-10
14-10
14-17
14-17
14-18
14-19
14-20
14-21
14-21
14-22
14-22