Options - Motorola Symbol MT2070 User Manual

Options

Use the Wireless Options dialog to select one of the following operation options from the drop-down list:
•
Operating Mode (Op Mode) Filtering
•
Regulatory
•
Band Selection
•
System Options
•
Auto PAC Settings
•
Change Password
•
Export.
Operating Mode Filtering
The Operating Mode Filtering options cause the Find WLANs application to filter the available networks found.
OP Mode Filtering Dialog Box
Figure 2-85
The AP Networks and Ad-Hoc Networks check boxes are selected by default.
OP Mode Filtering Options
Table 2-19
Field
AP Networks Select the AP Networks check box to display available AP networks and their signal strength
within the Available WLAN Networks (see
vicinity available to the device for association. If this option was previously disabled, refresh the
Available WLAN Networks screen to display the AP networks available to the device.
AD-Hoc Select the Ad-Hoc Networks check box to display available peer (adapter) networks and their
Networks signal strength within the Available WLAN Networks. These are peer networks in the vicinity that
are available to the device for association. If this option was previously disabled, refresh the
Available WLAN Networks screen to display the Ad Hoc networks available to the device.
Select Save to save the settings or select X to discard any changes.
Operating the MT2070/MT2090 2 - 67
Description
Find WLANs on page 2-33). These are the APs in the