Chapter 3 Scanning; Introduction; Beeper Definitions - Motorola Symbol MT2070 User Manual

Chapter 3 Scanning

Introduction

This chapter provides beeper and LED definitions, techniques involved in scanning bar codes, general instructions
and tips about scanning, and decode zone diagrams.

Beeper Definitions

The device issues different beep sequences and patterns to indicate status.
occur during both normal scanning and while programming the device.
Beeper Definitions
Table 3-1
Beeper Sequence
Standard Use
Low/medium/high beeps
Short high beep
4 long low beeps
5 low beeps
Low/low/low/extra low beeps
High beep
Image Capture
Low beep
High/low beeps
Parameter Menu Scanning
Low/high beeps
High/low beeps
Power up.
A bar code symbol was decoded (if decode beeper is enabled).
Transmission error.
Conversion or format error.
RS-232 receive error.
The device detected a <BEL> character over RS-232.
Snapshot mode started or completed.
Snapshot mode timed out.
Input error; incorrect bar code, programming sequence, or Cancel scanned.
Keyboard parameter selected. Enter value using numeric bar codes.
Table 3-1 defines beep sequences that
Indication