Setup Field(S) - Motorola Symbol DS6707 Product Reference Manual

11 - 30 Symbol DS6707 Digital Imager Scanner Product Reference Guide
Send Data (continued)
Send Next 19 Characters

Setup Field(s)

Setup Field(s) Definitions
Table 11-2
Parameter
Move Cursor
Move Cursor To a Character
Move Cursor to Start of Data
Move Cursor Past a Character
Skip Ahead "N" Characters
Skip Back "N" Characters
Send Preset Value
Scan Move Cursor To Character, then any printable ASCII character
from the Alphanumeric Keyboard on page
cursor to the position after the matching character. If the character is
not there, the rule fails and ADF tries the next rule.
Scan this bar code to move cursor to the beginning of the data.
This action moves the cursor past all sequential occurrences of a
selected character. For example, if the selected character is 'A', then
the cursor moves past 'A', 'AA', 'AAA', etc. Scan
Character, then select a character from the
If the character is not there, the cursor does not move (i.e., has no
effect).
Scan one of these bar codes to select the number of positions ahead
to move the cursor.
Scan one of these bar codes to select the number of positions back to
move the cursor.
Send Values 1 through 6 by scanning the appropriate bar code. Set
these values using the prefix/suffix values in
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
Send Next 20 Characters
Description
11-90. This moves the
Move Cursor Past
Alphanumeric
Table 8-4 on page
Page
11-31
11-31
11-31
Keyboard.
11-32
11-33
11-33
8-19.