Four Slot Cradles
The Symbol STB2000-C40007R four slot charge only and STB2000-C40017R four slot Ethernet cradle act as
chargers and host communication interfaces for the Symbol MT2000 Series cordless devices and batteries.
Cradles can sit on a desktop or be mounted on a wall. This document provides basic instructions for cradle set up
and use. Unless otherwise noted, cradle refers to both configurations of the cradle. Any discussion of transmission
of information refers specifically to the STB2000-C40017R four slot Ethernet cradle.
Cradle Features
See
Cradle Features on page
Inserting Devices and Batteries in the Cradle
When inserting the device in the cradle, insert the device top first. Push the handle until it clicks into place,
engaging the contacts in the cradle and device.
When inserting batteries in the cradle, align the connectors on the bottom of the battery with the battery charging
connectors in the cradle. Push down on the top of the battery until it clicks into place, engaging the contacts in the
cradle.
1
Insert Device in Desk/Wall Mount Cradles
Figure 13-1
NOTE When inserting the device in a wall mounted cradle, ensure the device's hook recesses engage the hooks
on the wall mount adapter.
Sending Data to the Host Computer
MT2000 Series include Ethernet cradle drivers that initiate automatically when you place the device in a properly
connected four slot Ethernet cradle. The cradle receives data from the device and transmits it to the host computer
via the Ethernet cable.
1-4.
Desk Mount
2
1
2
Wall Mount
1
2
Accessories 13 - 5