Insert The Device In The Cradle; Charge The Device Battery In The Cradle; Charging Indicator/Led; Configure The Device - Motorola Symbol MT2070 User Manual

Insert the Device in the Cradle

To insert the device in the cradle:
Insert the device into the cradle top first.
1.
Push the handle until it clicks into place, engaging the contacts in the cradle and device.
2.
Inserting the Device in the Single Slot Cradles
Figure 1-9
NOTE When inserting the device in a wall mounted cradle, ensure the device's hook recesses engage the hooks
on the wall mount adapter (when applicable).

Charge the Device Battery in the Cradle

For best performance, fully charge the device battery before using the device for the first time. To charge the
device battery, place the device in the cradle (see
charging when the device LED indicator starts flashing green. A complete charge of a fully discharged battery can
take up to four hours using external power and up to 10 hours using the interface cable.
Charge within the recommended temperature of 32° to 104° F (0° to 40° C) nominal, 41° to 95° F (5° to 35° C)
ideal.
For information on maximizing battery life, see

Charging Indicator/LED

The device has on screen charging indicators as well as an LED. The device's flashing green LED indicates
charging activity (see Table 3-2 on page
If the device displays
the battery. If one of these icons continues to display, contact Motorola Enterprise Mobility Support. See
Icons on page 2-9 for descriptions of display icons.

Configure the Device

Use the bar codes in this manual to configure the device. See
Scanner Options, Chapter 6, Imaging Preferences
device using bar code menus.
Insert the Device in the Cradle on page
Battery on page
3-3).
?
or ? indicating a charging problem, remove the device from the cradle and replace
15-2.
Chapter 5, User Preferences & Miscellaneous
and each host chapter for information about programming the
Getting Started 1 - 13
1-13). The battery begins
Screen