Table of Contents
Advertisement
The PMW-EX3 is illustrated here.
4
Connect this unit to the camcorder
with the PHU connection cable.
The PMW-EX3 is illustrated here.
Operations
Recording Camcorder
Video on This Unit
Select the drive
When the MODE SELECT switch is set to
[73GB×3], use the DRIVE SELECT switch
to select the drive that the camcorder
records to or plays back from.
Power the unit on
After turning on the camcorder, power the
unit on by pressing the power switch and
holding it for at least three seconds.
The POWER indicator flashes and
initialization starts. The POWER indicator
lights in green when initialization finishes
and the unit is ready to record. The
camcorder recognizes this unit as a hard
disk inserted into one of its card slots. When
the camcorder recognizes this unit, the
media status (A or B icon) that corresponds
to the slot in which the PHU connection
cable is inserted appears on the camcorder's
LCD monitor, just as it would for an SxS
memory card.
Press the SLOT SELECT button of the
camcorder to select the card slot where this
unit is connected.
Start recording
Recording to this unit starts when you press
the REC button on the camcorder.
For information on shooting methods, refer to the
operating instructions of the camcorder.
Operations
17
Advertisement
Table of Contents
