1
Replacing the staple cartridge (Finisher FS-526)
The following procedure describes how to replace the staple cartridge for finisher FS-526.
This illustration shows an example where the saddle stitcher SD-508 and punch kit PK-516 are installed in
the optional finisher FS-526.
NOTICE
When replacing the staple cartridge, be sure to check that the message is displayed. If the staple cartridge
is removed before the message is displayed, it will result in a failure.
Do not remove the remaining staples, otherwise the machine will not be able to staple after the cartridge is
replaced.
1-82
Replacing consumables
1
2
3
C652/C652DS/C552/C552DS/C452
1.22