Loading Paper Into The Bypass Tray - Konica Minolta bizhub C652 Quick Manual

1.20 Loading paper

Loading paper into the bypass tray

Paper can be fed manually through the bypass tray when you wish to print onto paper of a size that is not
loaded into a paper tray, or when you wish to print onto envelopes, OHP transparencies or other special
paper.
Follow the procedure described below to load paper into the bypass tray.
1
Open the bypass tray.
% When loading large-sized paper, pull out the tray extension.
2
Load the paper into the tray.
% Load paper so that the side to be printed on faces downward.
% Do not load so many pages that the top of the stack is higher than the , mark.
% Up to 150 sheets plain paper can be loaded.
% Slide the lateral guides to fit the size of paper to be loaded.
C652/C652DS/C552/C552DS/C452
1
1-55