Control Panel - Konica Minolta bizhub C652 Quick Manual

1.17

Control panel

1.17 Control panel
The control panel consists of the touch panel, which can be used to specify settings for the various functions,
and various keys, such as the [Start] key and the [Stop] key. The operations that can be performed with these
keys are described below.
In this manual, [ ] indicates keys on the control panel and buttons in the touch panel.
No. Part Name
1 Touch panel
2 Power indicator
3 Sub power switch
4 [Power Save] key
5 [Memory Mode] key
6 [Utility/Counter] key
7 [Reset] key
8 [Interrupt] key
9 [Stop] key
C652/C652DS/C552/C552DS/C452
Description
Displays various screens and messages.
Specify the various settings by directly touching the panel.
Lights up in blue when the machine is turned on with the main
power switch.
Press to turn on/off machine operations. When turned off, the
machine enters a state where it conserves energy.
Press to enter Power Save mode. While the machine is in Pow-
er Save mode, the indicator on the [Power Save] key lights up
in green and the touch panel goes off. To cancel Power Save
mode, press the [Power Save] key again.
Press to register (store) the desired copy/fax/scan settings as a
program or to recall a registered program.
Press to display the Utility/Counter screen.
Press to clear all settings (except programmed settings) en-
tered in the control panel and touch panel.
Press to enter Interrupt mode. While the machine is in Interrupt
mode, the indicator on the key lights up in green and the mes-
sage "Now in Interrupt mode." appears on the touch panel. To
cancel Interrupt mode, press the [Interrupt] key again.
Pressing this key while copying, scanning or printing temporar-
ily stops the operation.
1
1-39