Konica Minolta bizhub C652 Quick Manual page 270

7.5 Changing finishing settings for saved data before printing
Available Finishing settings
The Finishing settings that are available differ depending on the installed options. For details, refer to chapter
5 of the User's Guide [Copy Operations].
Setting
Sort
Group
Offset
Staple
Punch
Fold/Cent Half-Fold
er Staple
Center Staple & Fold
& Fold
Tri-Fold
Z-Fold
d
Reference
For details, refer to chapter 7 of the User's Guide [Box Operations].
C652/C652DS/C552/C552DS/C452
1
Description
Select this setting to separate each set of a multi-page document.
Select this setting to separate the copies of each page in a multi-
page document.
When a finisher is not in-
stalled
When a finisher is in-
stalled
Copies can be stapled in the corner or at two locations.
Holes for filing can be punched in the copies
Select this setting to fold copies in half before feeding them out.
Select this setting to staple copies at two locations along the cent-
er, then fold the copies in half before feeding them out.
Select this setting to fold copies in three before feeding them out.
Select whether the finished document is folded in half or in three,
whether it is folded in half and stapled, and whether it is folded in
half and one of the halves is mountain-folded. (The sizes that sup-
port Z-Fold: 11 × 17 w, A3 w, B4 w and 8Kw)
2
If the sorting conditions are met, copies
are fed out and sorted in an alternating
crisscross pattern.
The copies are fed out shifted to sepa-
rate them.
7
7-13