Charge Status Led Indications; Changing The Battery - Symbol P370 Keyless Reference Manual
Rf scanners
Hide thumbs
Also See for P370 Keyless:
- Product reference manual (202 pages) ,
- Quick reference manual (17 pages) ,
- Manual (17 pages)
Table of Contents
Advertisement
P370/P470 Keyless RF Scanners Product Reference Guide
Charge Status LED Indications
The LED indicator on the cradle uses flashing patterns to display the charger status, as
shown in the table below.
Off
Blinking Slowly
Blinking Rapidly
On
Changing the Battery
Once a battery is fully charged, it will generally last up to 10 hours without being returned
to the cradle. By returning it to the cradle during the day, you extend this time.
If a significant decrease in battery life is noticed and does not correspond to increased
usage, consider replacing the battery.
1-12
Table 1-1. Cradle LED Indications
LED
The scanner is not in the cradle or has not been
properly inserted into the cradle.
The scanner is properly seated in the cradle and
charging will begin shortly.
The battery is actively charging.
If scanner is in cradle - battery charging is
complete.
If scanner is not in cradle - base is locked up. Cycle
power (power off then on) to the base.
Status
Advertisement
Table of Contents
