Beeper Indications - Symbol P 300STD Product Reference Manual

Beeper Indications

Beeper Sequence
Standard Use
Short high tone
Low tone, followed by short high tone A PDF417 bar code symbol was decoded (if decode
4 Beeps - long low tone
5 Beeps - low tone
Low/high/low tone
High/high/high/low tone
Parameter Menu Scanning
Short high tone
Low/high tone
High/low tone
High/low/high/low tone
Table 1-1. Beeper Indicatio ns
A bar code symbol was decoded (if decode beeper is
enabled).
beeper is enabled).
A transmission error has been detected in a scanned
symbol. The data is ignored. This occurs if a unit is not
properly configured. Check option settings.
Convert or format error.
ADF transmit error.
RS-232 receive error.
Correct entry scanned or correct menu sequence
performed.
Input error, incorrect bar code or "Cancel" scanned,
wrong entry, incorrect bar code programming sequence;
remain in program mode.
Keyboard parameter selected. Enter value using bar code
keypad.
Successful program exit with change in the parameter
setting.
Getting Started
Indication
1-15