Decode Upc/Ean Supplemental Redundancy - Symbol P370 Keyless Reference Manual

Parameter Menus

Decode UPC/EAN Supplemental Redundancy

With Autodiscriminate UPC/EAN Supplementals selected, this option adjusts the number
of times a symbol without supplementals is decoded before transmission. The range is from
two to 20 times. Five or above is recommended when decoding a mix of UPC/EAN symbols
with and without supplementals, and the autodiscriminate option is selected.
Scan the bar code below to select a decode redundancy value. Next scan two numeric bar
codes beginning on page 4-98. Single digit numbers must have a leading zero. If you make
an error, or wish to change your selection, scan CANCEL on page 4-100.
DECODE UPC/EAN
SUPPLEMENTAL REDUNDANCY
4-29