P L
4 7 0
Indicator LED
Once the scanner is placed in the cradle, it will wait 15 minutes to
start charging the battery in the scanner. The LED blinks in a
specific pattern to show what the cradle is doing:
Off
Slow Blink
Fast Blink
On
Troubleshooting
If the cradle does not work after you've followed these operating
instructions:
•
Check the system power.
•
Check for loose cable connections.
•
Check the scanner is sitting properly in the cradle.
Cleaning
Wipe the cradle periodically with a lens tissue or other material
suitable for cleaning optical material, such as eyeglasses.
Caution: Do not pour, spray or spill any liquid on the cradle.
Preliminary
B a s e
The scanner is not in the cradle
Scanner is in cradle, not charging
Scanner is in cradle, charging
Scanner is in cradle, charge cycle is complete
8
C r a d l e